Stonelux® Inglenook Fireside - Stone Effect Inglenook Paint

INGLENOOK FIRESIDE

STONE EFFECT PAINT

Transform your Inglenook recess into a stunning stone focal point with StoneLux Inglenook Fireside.

Designed for use on the walls or recess next to a burner or stove.

Contains natural ground stone for an authentic stone look and feel
Comfortably withstands temperatures up to around 70 - 80℃
Quick and simple to apply
Easy to clean & washable
Eco-friendly & low odour

BUY NOW

Select your chosen colour, tin size (with or without Primer) & stone finish below.

CHOOSE YOUR COLOUR:

SELECTION: LIMESTONE

SELECTION: ROCKINGHAM

SELECTION: LAMPORT

SELECTION: MAGNA

SELECTION: BUFF

SELECTION: RICH BUFF

SELECTION: RODE

SELECTION: ASHRIDGE

SELECTION: TERRACOTTA

SELECTION: GREY

SELECTION: FORDE

SELECTION: BOWOOD

SELECTION: WOLFTON

SELECTION: APSLEY

SELECTION: BLACKPEARL

PAINT CALCULATOR FREE DELIVERY TO MAINLAND UK ON ORDERS OVER £125*

*Excludes Northern Ireland, Scotish Highlands, Channel Islands, & Isle of Man.

DESCRIPTION

A water-based stone effect paint designed for use on the wall or recess next to a fireplace. Our unique ground stone formulation provides a hard wearing finish that looks and feels like natural stone.

SUITABLE MATERIALS

Wood & Wood Finishes, Marble, Plaster, Masonry & Brickwork, Granite, MDF, Stone, Tiles, Resin, Concrete, Pre-Painted Surfaces

AVAILABLE SIZES

1L, 2.5L, 5L, 10L, 20L

APPLICATION METHOD

Brush, roller or spray. We recommend natural bristled economy paintbrushes for use with all Stonelux Paints.

CLEANING

Washable once cured. Clean brushes with water.

PROPERTIES

Drying Time: 2-3 hours in normal conditions.

Composition:Water-based

Coverage: 7.5 meters squared per 1 litre. Coverage can vary depending on the substrate.

VOC Content: LOV VOC CONTENT 0-0.29%. VOCs (Volatile Organic Compounds) contribute to atmospheric pollution. EU limit value for this product(CatA/c):40g/l(2010) This product contains max 6g/l VOC.

LIMITATIONS

Must be a minimum of 10cm away from the heat source. Do not apply in rain, temperatures below 10°C or above 30°C or if exposure to these conditions is likely during curing time.

SURFACE PREPARATION

Prepare all surfaces well. Ensure the surface is clean, sound and dry. Repair any damage with a suitable filler. Sane pre-painted and glossy surfaces. Apply at least one coat of Stonelux Primer & Undercoat.

BRUSH/ROLLER APPLICATION

Stir well before use. Apply using an economy natural bristled brush or a roller. Apply a MINIMUM of 3 even coats. Avoid overspreading. Leave 2-3 hours drying time between coats. Do not over brush/roll. If brush marks remain, finish with stippling before final coat dries.

SPRAY APPLICATION

Stir well before use. Apply 2-3 full and even coats to the surface. Wet film thickness should be between 300 and 500µm. Do not over coat on corners or joints. Allow 2-3 hours drying time between coats. Various psi settings can be used for a light or heavy finish (approx. 60psi for a medium textured finish). Nozzle size: 1.8-2.5mm (gravity fed gun) or 2-5mm (texture gun). Paint can be diluted using no more than 20% water.