Brick Coating
Brick Coating
Composition
- Water-based Formula: Eco-friendly and low odour. Clean equpment with with water.
- Natural Brick Finish: Specially formulated to recreate the appearance of natural brick.
Application
- Suitable for Interior and Exterior use.
- Adheres to a wide range of substrates including: brick, masonry, mortar, concrete, stone, wood, MDF, GRC, fibreglass, pre-painted surfaces, tiles, resin and more.
Durability and Ease of Maintenance
- Resistant to fading, chipping and peeling.
- Easy to clean with mid detergent and water.
Coverage and Application
- Covers up to 7.5m² per litre (per coat), varying by substrate and color.
- Apply with brush, foam roller, or spray.
Drying Time
- Touch-dry and re-coatable in 2-3 hours. Weather resistant in 72 hours. Fully cured in 7 to 14 days.
Availability
- Offered in a range of sizes: 250ml, 1 litre, 2.5 litres, 5 litres, and 10 litres.
For application instructions and other information, please refer to the Technical Data Sheet.
For safety information, please request a Safety Data Sheet.
- Preparation: Before starting your project, ensure the surface is clean, sound, and dry. If you're working on pre-painted or glossy surfaces, sand them to create a suitable key for the paint. Any damage should be repaired with a suitable filler.
- Application: Stir Brick Coating well before use. Apply using an economy natural bristled brush, foam roller, or spray equipment. Full coverage is typically achieved with three coats. Some original brick shading may be retained with fewer coats, allowing for various aesthetic preferences. Be careful to avoid overspreading and
refrain from over-brushing or rolling. If brush marks remain visible, finish the surface with stippling. Allow 2-3 hours of drying time between each coat. Allow 2-3 hours of drying time between each coat. - Spraying: If you choose to spray the paint, use a minimum nozzle size of 1.8mm. The paint can be diluted with no more than 20% water for spraying applications.
- Finishing: After applying the final coat, ensure that the paint is fully dry before touching or applying any pressure to the surface. The paint should be touch dry before applying subsequent coats.
Colours displayed on screen will vary from colour of filler - we recommend ordering a colour chart. Different application methods can cause slight variations in shade. For more information visit our colour accuracy page.
AVAILABLE COLOURS
PLEASE NOTE: We recommend testing a colour before purchase to ensure you are happy with the final result. Colours displayed on screen will vary from colour of paint. Different application methods can cause slight variations in shade. For more information visit our colour accuracy page.
CUSTOMER REVIEWS
- Reviews
- Questions
Really helpful sample colour chart. The closet match changed based on light conditions so you’ll Never get it right based on internet viewing. I have subsequently bought the colour and applied as directed - I genuinely cant see the repair. First class product.
A most to check correct colour match...
Excellent product
We phoned for advice and we received excellent service. On receipt of the product, which came very quickly, we are extremely happy with the results. Thank you for an excellent service!
Brick coating
I ordered the colour chart and using this I ordered a tin of dark red brick coating. The order arrived quickly but unfortunately the colour is not a good match. I think it would be useful if you had very small match pots to test before ordering a large tin. Coating is good just not the right colour in this instance.
Stonelux Paints
Thank you for your feedback, and we’re pleased to hear that your order arrived promptly. The 250ml tin you purchased is the smallest available size in our Brick Coating range, which also includes 1L, 2.5L, 5L and 10L tins. As this is already a relatively small volume, we don’t offer additional sample pots in this range, as they tend not to provide any meaningful advantage for customers or add much value when testing colour. All of our colour charts are hand-painted using the actual Brick Coating, so they offer a highly accurate representation of both colour and texture. However, the coating is designed to allow for buildable coverage. To achieve the full depth of colour shown on the chart and to block out the original brick colour completely, we recommend applying a minimum of three coats. If you’ve already done this and the colour still does not match the chart, please do get in touch and we’ll be happy to take a closer look. Kind regards, The Stonelux Team
Brilliant and better than I expected
House is part render/part brick. Due to age of house we have had work done to improve things. Previous owners painted the cills and round the bricks white. We are talking 60+ worth of paint and due to the windows being modern UVPC I could not use or risk using the paint removing products strong enough to removed. I bought The chart and from That picked 3 different colours. Painted each window surround brick to match the facing and made up pretend mortar and my neighbours thought I’d managed to get the white paint off. Thrilled with the result
Camouflaged pipe and cables
I had some newly installed cables and a pipe that looked awful but am halfway to losing them, one more coat should do it then paint in the mortar to match the bricks. I was delayed because of weather and health but it's looking great now.
Grey stone tint
Brilliant and did exactly what I wanted
General Enquiry
To date I've only purchased the colour chart. Very friendly & helpful staff over the phone. Hopefully will purchase a product in the future
